dmesg - Intel Core i5 750
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-686 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:04:25 UTC 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data)
BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS)
BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0xbf780 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E3FFF write-protect
E4000-E7FFF write-through
E8000-EBFFF write-protect
EC000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000373fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 10000-16000
RAMDISK: 7f17d000 - 7fffe5a9
Allocated new RAMDISK: 00100000 - 00f815a9
Move RAMDISK from 000000007f17d000 - 000000007fffe5a8 to 00100000 - 00f815a8
ACPI: RSDP 000f9960 00024 (v02 ACPIAM)
ACPI: XSDT bf780100 00054 (v01 092310 XSDT1705 20100923 MSFT 00000097)
ACPI: FACP bf780290 000F4 (v04 092310 FACP1705 20100923 MSFT 00000097)
ACPI: DSDT bf780460 05DAA (v02 1E657 1E657A72 00000A72 INTL 20051117)
ACPI: FACS bf78e000 00040
ACPI: APIC bf780390 0008C (v02 092310 APIC1705 20100923 MSFT 00000097)
ACPI: MCFG bf780420 0003C (v01 092310 OEMMCFG 20100923 MSFT 00000097)
ACPI: OEMB bf78e040 00072 (v01 092310 OEMB1705 20100923 MSFT 00000097)
ACPI: HPET bf78a460 00038 (v01 092310 OEMHPET 20100923 MSFT 00000097)
ACPI: DMAR bf78e0c0 00100 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
2179MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 00012000 - 00018e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 00014ccd2c] TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
#4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
#5 [00014cd000 - 00014d30d7] BRK ==> [00014cd000 - 00014d30d7]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000100000 - 0000f815a9] NEW RAMDISK ==> [0000100000 - 0000f815a9]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x000bf780
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bf780
On node 0 totalpages: 784142
free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 4360 pages used for memmap
HighMem zone: 553594 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c3000000 s34328 r0 d23016 u524288
pcpu-alloc: s34328 r0 d23016 u524288 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778014
Kernel command line: initrd=/live/initrd.img boot=live config persistent splash vga=0x317 hostname=bamt-miner quiet BOOT_IMAGE=/live/vmlinuz
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
------------[ cut here ]------------
WARNING: at /build/buildd-linux-2.6_2.6.32-41-i386-0vD9OO/linux-2.6-2.6.32/debian/build/source_i386_none/drivers/pci/dmar.c:636 check_zero_address+0x159/0x19d()
Hardware name:
Your BIOS is broken; DMAR reported at address fed90000 returns all ones!
BIOS vendor: American Megatrends Inc.; Ver: 080016 ; Product Version:
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.32-5-686 #1
Call Trace:
[] ? warn_slowpath_common+0x5e/0x8a
[] ? warn_slowpath_fmt+0x26/0x2a
[] ? check_zero_address+0x159/0x19d
[] ? detect_intel_iommu+0xe/0x52
[] ? mem_init+0xc/0x23d
[] ? start_kernel+0x196/0x31d
[] ? unknown_bootoption+0x0/0x185
---[ end trace a7919e7f17c0a725 ]---
Initializing HighMem for node 0 (000373fe:000bf780)
Memory: 3089524k/3137024k available (2506k kernel code, 45648k reserved, 1326k data, 380k init, 2231816k highmem)
virtual kernel memory layout:
fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc13bf000 - 0xc141e000 ( 380 kB)
.data : 0xc1272a57 - 0xc13be4c4 (1326 kB)
.text : 0xc1000000 - 0xc1272a57 (2506 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3753.585 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 7507.17 BogoMIPS (lpj=15014340)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz stepping 05
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU1: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x4 ip 0x6000
Initializing CPU#2
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU2: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU3: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (37308.59 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-3 level MC
groups: group c3003778 cpus 0 group c3083778 cpus 1 group c3103778 cpus 2 group c3183778 cpus 3
CPU1 attaching sched-domain:
domain 0: span 0-3 level MC
groups: group c3083778 cpus 1 group c3103778 cpus 2 group c3183778 cpus 3 group c3003778 cpus 0
CPU2 attaching sched-domain:
domain 0: span 0-3 level MC
groups: group c3103778 cpus 2 group c3183778 cpus 3 group c3003778 cpus 0 group c3083778 cpus 1
CPU3 attaching sched-domain:
domain 0: span 0-3 level MC
groups: group c3183778 cpus 3 group c3003778 cpus 0 group c3083778 cpus 1 group c3103778 cpus 2
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xec00-0xec1f]
pci 0000:00:1a.1: reg 20 io port: [0xe880-0xe89f]
pci 0000:00:1a.2: reg 20 io port: [0xe800-0xe81f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xc7efc000-0xc7efc3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xc7ef8000-0xc7efbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xe480-0xe49f]
pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f]
pci 0000:00:1d.2: reg 20 io port: [0xe080-0xe09f]
pci 0000:00:1d.3: reg 20 io port: [0xe000-0xe01f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xc7ef6000-0xc7ef63ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xdc00-0xdc07]
pci 0000:00:1f.2: reg 14 io port: [0xd880-0xd883]
pci 0000:00:1f.2: reg 18 io port: [0xd800-0xd807]
pci 0000:00:1f.2: reg 1c io port: [0xd480-0xd483]
pci 0000:00:1f.2: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xc7ef4000-0xc7ef47ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xc7ef2000-0xc7ef20ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xc4000000-0xc5ffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xd7ffffff]
pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xd8000000-0xdbffffff]
pci 0000:01:00.0: reg 24 io port: [0x9c00-0x9c7f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xc7980000-0xc79fffff]
pci 0000:01:00.1: reg 10 32bit mmio: [0xc797c000-0xc797ffff]
pci 0000:00:03.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:03.0: bridge 32bit mmio: [0xc3800000-0xc79fffff]
pci 0000:00:03.0: bridge 64bit mmio pref: [0xc7f00000-0xdfefffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xc7afc000-0xc7afffff]
pci 0000:03:00.0: reg 18 io port: [0xa800-0xa8ff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xc7ac0000-0xc7adffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0xa000-0xafff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xc7a00000-0xc7afffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xc7bfc000-0xc7bfffff]
pci 0000:04:00.0: reg 18 io port: [0xb800-0xb8ff]
pci 0000:04:00.0: reg 30 32bit mmio pref: [0xc7bc0000-0xc7bdffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xc7b00000-0xc7bfffff]
pci 0000:05:00.0: reg 10 io port: [0xcc00-0xcc07]
pci 0000:05:00.0: reg 14 io port: [0xc880-0xc883]
pci 0000:05:00.0: reg 18 io port: [0xc800-0xc807]
pci 0000:05:00.0: reg 1c io port: [0xc480-0xc483]
pci 0000:05:00.0: reg 20 io port: [0xc400-0xc40f]
pci 0000:05:00.0: reg 24 32bit mmio: [0xc7cffc00-0xc7cfffff]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: PME# supported from D0 D1 D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.6: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.6: bridge 32bit mmio: [0xc7c00000-0xc7cfffff]
pci 0000:07:03.0: reg 10 32bit mmio: [0xc7dff800-0xc7dfffff]
pci 0000:07:03.0: reg 14 32bit mmio: [0xc7df8000-0xc7dfbfff]
pci 0000:07:03.0: supports D1 D2
pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:07:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xc7d00000-0xc7dfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:07: ioport range 0xa00-0xadf has been reserved
system 00:07: ioport range 0xae0-0xaef has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x500-0x57f has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved
system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved
pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
pci 0000:00:03.0: IO window: 0x9000-0x9fff
pci 0000:00:03.0: MEM window: 0xc3800000-0xc79fffff
pci 0000:00:03.0: PREFETCH window: 0x000000c7f00000-0x000000dfefffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.4: IO window: 0xa000-0xafff
pci 0000:00:1c.4: MEM window: 0xc7a00000-0xc7afffff
pci 0000:00:1c.4: PREFETCH window: 0x000000c0400000-0x000000c05fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.5: IO window: 0xb000-0xbfff
pci 0000:00:1c.5: MEM window: 0xc7b00000-0xc7bfffff
pci 0000:00:1c.5: PREFETCH window: 0x000000c0600000-0x000000c07fffff
pci 0000:00:1c.6: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.6: IO window: 0xc000-0xcfff
pci 0000:00:1c.6: MEM window: 0xc7c00000-0xc7cfffff
pci 0000:00:1c.6: PREFETCH window: 0x000000c0800000-0x000000c09fffff
pci 0000:00:1c.7: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.7: IO window: 0x2000-0x2fff
pci 0000:00:1c.7: MEM window: 0xc0a00000-0xc0bfffff
pci 0000:00:1c.7: PREFETCH window: 0x000000c0c00000-0x000000c0dfffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xc7d00000-0xc7dfffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: enabling device (0104 -> 0107)
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xc3800000-0xc79fffff]
pci_bus 0000:01: resource 2 pref mem [0xc7f00000-0xdfefffff]
pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc01fffff]
pci_bus 0000:02: resource 2 pref mem [0xc0200000-0xc03fffff]
pci_bus 0000:03: resource 0 io: [0xa000-0xafff]
pci_bus 0000:03: resource 1 mem: [0xc7a00000-0xc7afffff]
pci_bus 0000:03: resource 2 pref mem [0xc0400000-0xc05fffff]
pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:04: resource 1 mem: [0xc7b00000-0xc7bfffff]
pci_bus 0000:04: resource 2 pref mem [0xc0600000-0xc07fffff]
pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:05: resource 1 mem: [0xc7c00000-0xc7cfffff]
pci_bus 0000:05: resource 2 pref mem [0xc0800000-0xc09fffff]
pci_bus 0000:06: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:06: resource 1 mem: [0xc0a00000-0xc0bfffff]
pci_bus 0000:06: resource 2 pref mem [0xc0c00000-0xc0dfffff]
pci_bus 0000:07: resource 1 mem: [0xc7d00000-0xc7dfffff]
pci_bus 0000:07: resource 3 io: [0x00-0xffff]
pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 14853k freed
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: parse DMAR table failure.
audit: initializing netlink socket (disabled)
type=2000 audit(1361404601.631:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1706
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.5: irq 32 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.6: irq 33 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.7: irq 34 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
aer 0000:00:03.0:pcie02: service driver aer loaded
vesafb: framebuffer at 0xd9000000, mapped to 0xf7c80000, using 3072k, total 14336k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:bfa0
vesafb: pmi: set display start = c00cc007, set palette = c00cc066
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
CE: hpet2 increasing min_delta_ns to 15000 nsec
CE: hpet2 increasing min_delta_ns to 22500 nsec
CE: hpet3 increasing min_delta_ns to 15000 nsec
CE: hpet3 increasing min_delta_ns to 22500 nsec
hrtimer: interrupt took 2540 ns
CE: hpet4 increasing min_delta_ns to 15000 nsec
CE: hpet4 increasing min_delta_ns to 22500 nsec
CE: hpet5 increasing min_delta_ns to 15000 nsec
CE: hpet5 increasing min_delta_ns to 22500 nsec
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2013-02-20 23:56:42 UTC (1361404602)
Initalizing network drop monitor service
Freeing unused kernel memory: 380k freed
Write protecting the kernel text: 2508k
Write protecting the kernel read-only data: 920k
udev[77]: starting version 164
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 2
sky2 driver version 1.28
sky2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
sky2 0000:03:00.0: setting latency timer to 64
ehci_hcd 0000:00:1a.7: irq 16, io mem 0xc7efc000
sky2 0000:03:00.0: Yukon-2 UL 2 chip revision 0
firewire_ohci 0000:07:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:03:00.0: irq 35 for MSI/MSI-X
sky2 eth0: addr 00:1f:bc:08:e7:3c
sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 UL 2 chip revision 0
sky2 0000:04:00.0: irq 36 for MSI/MSI-X
sky2 eth1: addr 00:1f:bc:08:e7:3b
libata version 3.00 loaded.
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 37 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc7ef4000 port 0xc7ef4100 irq 37
ata2: SATA max UDMA/133 abar m2048@0xc7ef4000 port 0xc7ef4180 irq 37
ata3: SATA max UDMA/133 abar m2048@0xc7ef4000 port 0xc7ef4200 irq 37
ata4: SATA max UDMA/133 abar m2048@0xc7ef4000 port 0xc7ef4280 irq 37
ata5: SATA max UDMA/133 abar m2048@0xc7ef4000 port 0xc7ef4300 irq 37
ata6: SATA max UDMA/133 abar m2048@0xc7ef4000 port 0xc7ef4380 irq 37
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 2
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc7ef6000
firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 21, io base 0x0000ec00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 16, io base 0x0000e400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e080
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000e000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: UHCI Host Controller
usb usb9: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb9: SerialNumber: 0000:00:1d.3
usb usb9: configuration #1 chosen from 1 choice
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
pata_marvell 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pata_marvell 0000:05:00.0: setting latency timer to 64
scsi6 : pata_marvell
scsi7 : pata_marvell
ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 18
ata8: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 18
ata1: SATA link down (SStatus 0 SControl 300)
usb 2-4: new high speed USB device using ehci_hcd and address 2
usb 2-4: New USB device found, idVendor=7392, idProduct=7811
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: 802.11n WLAN Adapter
usb 2-4: Manufacturer: Realtek
usb 2-4: SerialNumber: 00e04c000001
usb 2-4: configuration #1 chosen from 1 choice
firewire_core: created device fw0: GUID ffd9ffbcc7df66f1, S400
usb 2-5: new high speed USB device using ehci_hcd and address 3
ata2: SATA link down (SStatus 0 SControl 300)
usb 2-5: New USB device found, idVendor=0781, idProduct=5530
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: Product: Cruzer Glide
usb 2-5: Manufacturer: SanDisk
usb 2-5: SerialNumber: 20043512930CF7838E2A
usb 2-5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD2002FAEX-0 05.0 PQ: 0 ANSI: 5
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: New USB device found, idVendor=046d, idProduct=c016
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Optical USB Mouse
usb 3-2: Manufacturer: Logitech
usb 3-2: configuration #1 chosen from 1 choice
ata4: SATA link down (SStatus 0 SControl 300)
usb 9-1: new full speed USB device using uhci_hcd and address 2
usb 9-1: New USB device found, idVendor=10c4, idProduct=84c4
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-1: Product: Fitbit Base Station
usb 9-1: Manufacturer: Silicon Labs
usb 9-1: SerialNumber: 01014E99FDC0130C002014E99FDC0
usb 9-1: configuration #1 chosen from 1 choice
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: OCZ-VECTOR, 1.03.1, max UDMA/133
ata5.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA OCZ-VECTOR 1.03 PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver hiddev
sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 4:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sdb: unknown partition table
sd 4:0:0:0: [sdb] Attached SCSI disk
unknown partition table
sd 2:0:0:0: [sda] Attached SCSI disk
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3
generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-2/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
[drm] Initialized drm 1.1.0 20060810
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0: no devices on the port
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: no devices on the port
ide1 at 0x170-0x177,0x376 on irq 15
usb-storage: device scan complete
scsi 8:0:0:0: Direct-Access SanDisk Cruzer Glide 1.26 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Attached SCSI removable disk
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
aufs: module is from the staging directory, the quality is unknown, you have been warned.
aufs 2-standalone.tree-32-20100125
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdc2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
udev[1741]: starting version 164
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
input: PC Speaker as /devices/platform/pcspkr/input/input4
ACPI: WMI: Mapper loaded
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Unsupported chipset 0x0c0680a3
nouveau 0000:01:00.0: PCI INT A disabled
nouveau: probe of 0000:01:00.0 failed with error -22
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC889: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
coretemp coretemp.0: Unable to access MSR 0xEE, for Tjmax, left at default
coretemp coretemp.1: Unable to access MSR 0xEE, for Tjmax, left at default
coretemp coretemp.2: Unable to access MSR 0xEE, for Tjmax, left at default
coretemp coretemp.3: Unable to access MSR 0xEE, for Tjmax, left at default
fuse init (API version 7.13)
apm: BIOS not found.
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth1: enabling interface
ADDRCONF(NETDEV_UP): eth1: link is not ready
sky2 eth1: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
fglrxinfo[5735]: segfault at 4 ip b766bc18 sp bfc3fafc error 4 in fglrx-libGL.so.1.2[b75f2000+c9000]
fglrxinfo[5737]: segfault at 4 ip b77c3c18 sp bfe8604c error 4 in fglrx-libGL.so.1.2[b774a000+c9000]
fglrxinfo[5760]: segfault at 4 ip b77fac18 sp bfdc60ac error 4 in fglrx-libGL.so.1.2[b7781000+c9000]
fglrxinfo[5768]: segfault at 4 ip b7721c18 sp bfec792c error 4 in fglrx-libGL.so.1.2[b76a8000+c9000]
fglrxinfo[10467]: segfault at 4 ip b784bc18 sp bfeb344c error 4 in fglrx-libGL.so.1.2[b77d2000+c9000]
fglrxinfo[10469]: segfault at 4 ip b77dfc18 sp bf954e3c error 4 in fglrx-libGL.so.1.2[b7766000+c9000]
glxinfo[11198]: segfault at 4 ip b780fc18 sp bfba6b7c error 4 in fglrx-libGL.so.1.2[b7796000+c9000]
glxinfo[11201]: segfault at 4 ip b76c0c18 sp bfbf804c error 4 in fglrx-libGL.so.1.2[b7647000+c9000]
glxinfo[11338]: segfault at 4 ip b774bc18 sp bfbe71fc error 4 in fglrx-libGL.so.1.2[b76d2000+c9000]
glxinfo[11341]: segfault at 4 ip b777fc18 sp bf89a47c error 4 in fglrx-libGL.so.1.2[b7706000+c9000]
glxinfo[11437]: segfault at 4 ip b77abc18 sp bffd796c error 4 in fglrx-libGL.so.1.2[b7732000+c9000]
glxinfo[11440]: segfault at 4 ip b7679c18 sp bfdd916c error 4 in fglrx-libGL.so.1.2[b7600000+c9000]
EXT4-fs (sdb): mounted filesystem with ordered data mode
glxinfo[12334]: segfault at 4 ip b7857c18 sp bfa68e5c error 4 in fglrx-libGL.so.1.2[b77de000+c9000]
glxinfo[12337]: segfault at 4 ip b770ac18 sp bfdf75cc error 4 in fglrx-libGL.so.1.2[b7691000+c9000]